17. Gently release the adhesive of the FLEX.
19. Carefully lift up the glued in LCD AM.
21. Flip over the LCD now.
23. Release both countersunk screws in the order shown.
Page
12
(20)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
18. Once released, these FLEX can't be used again.
20. Note the correct positioning of the SS-93. Do not destroy
the components underneath.
22. Open the flex connector of the LCD.
24. Unlock the latches of the A-COVER...
N81 RM-179/RM-223/RM-256
Service Manual Level 1&2
ISSUE 3