Tidying Up the Connected Cables (C*FG73* model only)
1
Stand assembly is complete.
Adjust the screen following the arrow direction.
5
Place the corresponding cables into the stand-neck
holder. Do not stretch the cable. Three cables in one
holder is recommended.
2
Rotate the machine to the highest vertical position.
― The monitor may get damaged if you rotate the
screen without tilt, or counter clockwise direction
6
Cover the COVER-STAND NECK LEFT.
3
Connect the corresponding cables.
7
Rotate the machine to the horizontal position.
4
Open the COVER-STAND NECK LEFT, and rotate the
open part at the bottom.
8
Arrange the external cables.
29