Connecting The Devices - Acer AL1516 User Manual

Connecting the Devices

Caution: Make sure that the computer and the monitor are both disconnected from the
power supply.
○ Power Code
1
○
VGA Cable
2
○ DVI-D Cable
3
(Optional)
！WARNING:
1. Make sure the VGA card of your computer to connect the correct cable.
2. Make sure the shape of the plug matches the shape of the socket it is inserted into.
And that none of the pins are bent or otherwise damaged.
Attach the monitor to the power cord which should then be inserted
into a properly grounded electric socket.
Connect the signal cable to the VGA input socket of the monitor , and
connect the signal cable to the VGA output socket of the graphics card
on the computer. Then tighten the thumbscrews on the connector.
Connect the signal cable to the DVI-D input socket of the monitor , and
connect the signal cable to the DVI-D output socket of the graphics
card on the computer. Then tighten the thumbscrews on the connector.
VGA
5
DVI-D