Table of Contents
Advertisement
Removing and installing the filter
The filter must be serviced regularly in order to guarantee
efficient filtration of odours and grease.
Metal grease filter
The metal grease filters must be cleaned every 100 operating
hours or at least every two months.
:
Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without the grease filter.
Removing metal grease filter
The metal grease filters filter the grease out of kitchen steam.
To keep them in good working order, the filters should be
cleaned at least every two months.
Open the lock on the metal grease filters and remove the
1.
filters from the retainer.
Notes
When you do this, take hold of the metal grease filters from
■
underneath with your other hand.Make sure that the metal
grease filters do not fall and damage the hob.
Fat may accumulate in the bottom of the metal grease
■
filters. Hold the filters level to prevent fat from dripping out.
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
Fault table
Problem
Possible cause Solution
The appliance
The plug is not
does not work
plugged into the
mains
Power cut
The fuse is
faulty
The lighting
The LED lights
does not work.
are defective.
--------
6
Connect the appliance to
the power supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse for
the appliance is in working
order
Call the after-sales service.
Clean the metal grease filters.
2.
Clean the inside of the appliance.
3.
Cleaning the metal mesh grease filters
Notes
Do not use any aggressive, acidic or alkaline cleaning
■
agents.
When cleaning the metal mesh grease filters, also clean the
■
holder for the metal mesh grease filters in the appliance
using a damp cloth.
The metal mesh grease filters can be cleaned in the
■
dishwasher or by hand.
By hand:
Note: You can use a special grease solvent for stubborn dirt. It
can be ordered via the Online Shop.
Soak the metal mesh grease filters in a hot soapy solution.
■
Clean the filters with a brush and then rinse them thoroughly.
■
Leave the metal mesh grease filters to drain.
■
In the dishwasher:
Note: If the metal mesh grease filters are cleaned in the
dishwasher, slight discolouration may occur. This has no effect
on the function of the metal mesh grease filters.
Do not clean heavily soiled metal mesh grease filters together
■
with utensils.
Place the metal mesh grease filters loosely in the dishwasher.
■
The metal mesh grease filters must not be wedged in.
Installing the metal mesh grease filter
Insert metal grease filter.
1.
Fold up metal grease filter and engage the lock.
2.
Note: Make sure that the filter lock engages properly.
LED lights
Defective LED lights may be replaced by the manufacturer, their
after-sales service or a qualified technician (electrician) only.
Advertisement
Table of Contents
