Panasonic Viera TH-P42S10D Operating Instructions Manual page 39

Features available (Using VIERA Link Menu)
You can control the theatre speaker with this TV remote control by pointing at the TV's signal receiver.
If you cannot operate, check the settings and the equipment
z
Access and control the speaker volume
MUTE
Note
This function may not work properly depending on the connected equipment.
z
Image or sound may not be available for the first few seconds when Input mode is switched.
z
Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier.
z
Read the manual of the equipment.
"HDAVI Control 4" is the newest standard (current as of December, 2008) for HDAVI Control compatible equipment.
z
This standard is compatible with conventional HDAVI equipment.
To confirm this TV's version of HDAVI Control
z
Speaker control
1 Display "VIERA Link Menu"
2 Select "Speaker Selection"
VIERA Link Menu
Pause Live TV Start
Direct TV Rec Start
VIERA Link Control Recorder
Speaker Selection Home Cinema
3 Set to "Home Cinema" or "TV"
Home Cinema
Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turned on if
it is in Standby mode and the sound is from theatre speakers connected to the
equipment.
Volume up / down
z
(Volume slide bar will be displayed when adjusting the volume
¨
VOL
of the equipment.)
Mute
¨
z
MUTE
The sound of TV speakers is mute.
z
When the equipment is turned off, TV speakers will be active.
z
TV
TV speakers are active.
Note
If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an
z
Amplifier, connect with HDMI cable and Optical digital audio cable (p. 35),
and then select "Home Cinema".
To enjoy the sound from the DIGA Recorder in multi-channel sound, connect
an HDMI cable from the DIGA Recorder to the Amplifier (p. 35).
"System Information" (p. 23)
¨
Speaker Selection
"VIERA Link features and connections" (p. 35)
¨
select
set
39