Table of Contents
Advertisement
Image of the lens moving
In the example below, the images with aspect ratio of
1.78:1 (16:9) and 2.35:1 are projected on a 2.35:1 screen.
When a 1.78:1 (16:9) image is input
When a 2.35:1 image is input
The 2.35:1 image expands to fill the screen.
Notes
• After you have selected and confirmed the lens position, the lens
starts to move. Do not touch, or place anything near, the lens,
otherwise it may cause injury or a malfunction.
• If you press any button on the remote control or the unit while the
lens is moving, the lens stops. In this case, select the lens position
again or adjust the lens manually.
• The Picture Position function is not guaranteed to reproduce the
lens settings precisely.
• When you use the subtended screen angle of two or more aspects
using lens zoom, install the unit within the specified parameters
referring to "Projection distance" (page 48). With some setting
positions, the range of lens shift may be restricted, even though the
unit is installed within the specified parameters.
Press the POSITION button.
Selecting the Aspect
Ratio According to the
Video Signal
You can select an aspect ratio best suited for the video
signal received.
Press ASPECT.
Each time you press the button, you can select the "Aspect"
setting.You can also select it using the menu (page 25).
ASPECT
button
Original image (for 16:9
display)
1.85:1
Squeezed 1.85:1
2.35:1
Squeezed 2.35:1
16:9
14
Recommended setting and
resultant images
1.85:1 Zoom
2.35:1 Zoom
H Stretch
When projecting a 1.78:1 (16:9)
video on the entire 2.35:1 screen
Advertisement
Table of Contents
