Connecting External Devices; Hdmi Connection; Ypbpr (Component Connection); Scart Connection - Sharp LC-26SH330E Operation Manual

Connecting external devices

Before connecting ���
E
• Be sure to turn off the TV and any devices before
making any connections.
• Firmly connect a cable to a terminal or terminals.
• Carefully read the operation manual of each external
device for possible connection types. This also
helps you get the best possible audiovisual quality to
maximise the potential of the TV and the connected
device.

HDMI connection

Example of connectable devices
E DVD E Blu-ray player/recorder
The HDMI connections (High Definition Multimedia
Interface) permit digital video and audio transmission
via a connection cable from a player/recorder. The
digital picture and sound data are transmitted without
data compression and therefore lose none of their
quality. Analogue/digital conversion is no longer
necessary in the connected devices, which also would
result in quality losses.
HDMI
HDMI device
DVI
DVI/HDMI conversion
• Using an DVI/HDMI adapter cable, the digital video
signals of a DVD can also be played via the compatible
HDMI connection. The sound must be fed in additionally.
• Both HDMI and DVI use the same HDCP copy
protection method.
Supported video signal:
576p, 480p, 1080i, 720p, 1080p
See page 26 for PC signal compatibility.
24
HDMI cable
DVI-HDMI cable
Audio cable

YPbPr (Component connection)

Example of connectable devices
E VCR E DVD E Blue-ray player/recorder
You will enjoy accurate colour reproduction and high
quality images through the (YPbPr) when connecting a
DVD recorder or other recording equipment.
(YPbPr) Component
Connection
Audio cable

SCART connection

Example of connectable devices
E Decoder
When using the SCART 1
E
Full SCART, which transmits RGB, S-Video and CVBS
in, and CVBS tuner out.
Decoder
Component cable
SCART cable