Table of Contents
Advertisement
Selecting and Adjusting the Screen
Adjusting Screen CLOCK/PHASE and Position
ARC
To select the image size of the screen.
Spectacle
Full
Original
4:3
16:9
1:1
14:9
Zoom1, 2
ARC
Spectacle
Full
Original
4:3
16:9
14:9
Zoom1
Zoom2
1:1
Use this function to reset the product to the factory default.(Manual config. manu only)
Reset
When your AV receives the wide screen signal, it will lead you to
adjust the picture horizontally, in a nonlinear proportion, to fill the entire
screen.
When your AV receives the wide screen signal, it will lead you to adjust
the picture horizontally or vertically, in a linear proportion, to fill the entire
screen fully. (Europe version only)
When your AV receives the wide screen signal, it will be automatically
changed to picture format to be sent.
This pIcture format is 4 to 3 of general AV.
You can enjoy the cinema (the picture format of 16:9) or general TV
programme thorough the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to
the left and right so that the screen 16:9 is full.
This pIcture format is 1 to 1 of general AV. (only RGB PC, HDMI/DVI PC)
You can enjoy the picture format of 14:9 or general AV programme
through the 14:9 mode.
The screen 14:9 is viewed just like that the screen 4:3 is magnified to the
upper/lower and left/right.
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides so that
screen 16:9 is full. The bottom and top of the picture may be lost.
MODE
AV
Component
A30
HDMI/DVI
DTV
DTV
PC
RGB
PC
Advertisement
Table of Contents
