Application Rules - D-Link DIR-825 User Manual

Section 3 - Configuration
Click Port Triggering on the navigation menu to configure Port Triggering. Port triggering
allows external ports to be opened for remote access when triggered by activity by a local
computer on specified ports. When you are satisfied with your configuration, click Save
Settings.

24 -- APPLICATION RULES

Enable: Check the box to enable this rule.
Name: Enter a name for the application you wish to apply the virtual server
to. Use the Application Name dropdown menu and the << button
to quickly select an application. The name, port numbers, and traffic
type are automatically populated.
Trigger Port:
Enter the trigger port.
Traffic Type: Select TCP, UDP, or All.
Firewall Port:
Enter the firewall port to open once triggered.
Traffic Type: Select TCP, UDP, or All.
Schedule: Select the schedule from the drop-down menu. The default is Always.
Refer to Schedules on page 113 for more information on creating
new schedules.
Click the Save Settings button when you are finished.
D-Link DIR-825 User Manual
Application Rules
DIR-825
APPLICATION RULES APPLICATION RULES
APPLICATION RULES
The Application Rules option is used to open single or multiple ports in your firewall when the router senses data sent to the Internet
on an outgoing "Trigger" port or port range. Special Application rules apply to all computers on your internal network.
Save Settings Don't Save Settings
24 -- APPLICATION RULES
Remaining number of rules that can be created: 24
Name Application <<
☐
Application Name
▼
Save Settings Don't Save Settings
ADVANCED
Port Traffic Type
Trigger
TCP ▼
Schedule
Always ▼
Firewall
TCP ▼
83