How Do I Add Extra Sensors To My App; Time: Does This Alarm Clock Have Atomic Time; How Do I Manually Set The Time - La Crosse Technology C82929V2 Faqs

2. Hold the MINUS (-) button for 3 seconds to delete this sensor. The sensor readings and
ID will show dashes.
3. Sensor will no longer show in the Extra Sensor area.
Open your La Crosse View app to add sensors. Watch the video for adding devices to
the La Crosse View app:
1. From Main Menu - select "Devices" under "Add/Edit"
2. On Edit Devices page - select "ADD DEVICE"
3. Scan Device ID - Scan the bar code on your sensor or choose "ADD MANUALLY" to type in
the number on the bar code. Select "CONTINUE".
4. On Confirm Device page - Confirm the sensor image and select "YES"
5. On Enter Device and Location Name page - enter Device Name and select a location or
enter a Location Name for your sensor. Select "DONE".
Repeat steps 1-5 for any additional sensors you wish to add.

TIME: DOES THIS ALARM CLOCK HAVE ATOMIC TIME?

• Standalone alarm clock: When operating as a standalone alarm clock, the time needs
to be set manually on this alarm clock.
• Connected to the La Crosse View™ app: When operating as a connected alarm clock
the time and date will update from the Internet. Your alarm clock checks with the View
Weather Server at least 4 times per day.
When operating as a standalone alarm clock, you can manually adjust your alarm
clock's settings:
1. Hold the SET button for 3 seconds to enter settings menu.
2. Press and release the + or - buttons to adjust the flashing values. Hold to adjust quickly.
3. Press and release the SET button to confirm and move to the next item.
Note: Press and release the LIGHT button any time to exit settings

HOW DO I ADD EXTRA SENSORS TO MY APP?

http://bit.ly/LaCrosseView_Support_Vid_10

HOW DO I MANUALLY SET THE TIME?

5 | P a g e