Table of Contents
Advertisement
Section 4 - Configuration
Select PPPoA if your ISP provides and requires you to enter a PPPoA username
and password in order to connect to the Internet. For ADSL connections only.
WAN Settings
Connection:
Select PPPoA.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Confirm Password:
Enter the password provided by your ISP again.
Connection Type:
Select PPPoA LLC or PPPoA VC-Mux.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Select Default Route or None.
Usage
NAT Enable:
Enable or disable Network Address Translation.
Authentication
Select the authentication protocol your ISP uses. The options are
Protocol:
Auto, PAP, or CHAP.
Connect mode
Set the connection to be Always-on, Connect-On-Demand, or
select:
Manual.
If you selected Connect-On-Demand, the following option is available:
Maximum Idle
Enter the amount of time the router will maintain the Internet
Time:
connection before disconnecting if there is no activity.
Click Save when you are done.
D-Link DSL-3890 User Manual
PPPoA
36
Hide quick links:
Advertisement
Table of Contents
