Shark Press & Refresh GS500N Series User Manual page 9

Assembly of the Vertical Press Pad
Assembly & use instructions:
1 R emove contents of the Press &
Refresh ™ Garment Care System
and lay them out on a flat
surface to see that you have all
the components to complete
the assembly.
2 R EAD ALL INSTRUCTIONS
BEFORE USING YOUR PRESS
& REFRESH GARMENT CARE
™
SYSTEM.
IMPORTANT: Always make
sure the garment steamer is
UNPLUGGED from the electrical
outlet when not in use. Never
fill the water reservoir when the
unit is plugged in.
GS500N_Series_IB_ES_100813.indd 9
Fig. 1
Fig. 2
Assembling the vertical
press pad:
3
I nsert the garment hook into
the opening at the top of the
vertical press pad (Fig. 1).
Secure the rod into the garment
hook on either side of the pad
making sure they are inserted
firmly (Fig. 2). The support
rods come assembled in the
pad.
4
T he Vertical Press Pad comes
asembled with heat protection
panels in the pockets on the
back. These panels protect your
door from heat damage and
should be in place at all times
during use.
The straps can be adjusted
to fit any door using the
buckle to adjust the strap
lengths.
Fig. 3
5
A ttach the vertical press pad to
any door. With the door open,
loop the straps at the top of the
vertical press pad around the
corner of the door and repeat
on the opposite side. Gently
tug on the pad to make sure
it is secure and shut the door
completely to ensure the pad is
stable for pressing. Be careful
not to close the door on your
fingers. Adjust the straps to the
appropriate height for comfort
(Fig. 3).
Care instructions:
6 R emove the 8 heat protection
panels from the back of the
pad and remove the garment
hook and rods. Machine wash
in warm water with liquid
detergent and lay flat to dry.
Do not use bleach or fabric
softener.
www.sharkclean.com
10-08-13 8:58 AM
English
9