Samsung RemoteVIEW SEW-3020 User Manual page 6

SideControls
Press the button to start or stop the built-in tunes.
* tunes playing is not available when recording
Press the button to play next tune.
Connect the included USB cable to view video from the receiver
Press to auto record or manual record during monitoring.
Only available when the Micro SD card is inserted. (Not included)
REC [A] : Start recording when an alarm is detected.
REC [M] : Start recording when the button is pressed.
MicroSdCardCompartment
Insert Micro SD card for video recording capavility. (Not included)
Connect the included AC power adapter to power and/or
charge the receiver battery (when the receiver is not placed in the
WirelessCamera
SideControls
SoundAlarmTrigger
Adjust the sensitivity knob to set the sound alarm
The receiver will beep to alert you when the sound is
above a preset sound level.
Adjust to increase or decrease the level of sensitivity.
Increase or decrease the speaker volume when playing
nightvisionsensor
Detects light levels where the camera is placed.
 · Getting Started
SEW-3020-ENGLISH.indd 6
+/@Button
PButton
uSBport(optionaluse)
on your computer.
A/Mrecord
dC5Vpowerinput
optional Charge cradle).
sensitivity.
Volume
a lullaby.
TalkButton
Press down and hold the button to talk back to the camera
currently being displayed on the LCD screen.
nightLightButton
Press to remotely turn on/off the night light on the camera (for the
camera currently being displayed on the LCD screen).
When the night light is on, an indication icon will be displayed on
the LCD screen.
receiveronandlowbatteryindication
When the Unit is turned on the LED is solid green.
If the LED blinks then the battery charge is low. Please connect
to the AC power adapter to charge.
ChargingindicationLed
A red LED shows battery is charging.
A Green LED shows battery is fully charged.
powerSlideSwitch
Slide the switch to ON or OFF position to switch on/off the
receiver.
Cameraon/oFFSwitch
Turns the camera ON or OFF.
Cameraonandlowbatteryindication
Turn on the camera, the LED light will blink green once;
Low battery, the LED will blink repeatedly.
When the camera is turned on, the LED light would
appear green. After 2 seconds, it goes out.
2011-04-12 오후 2:53:18