Changing The Picture Options - Samsung LN52C530F1F User Manual

Changing the Picture Options

¦
Advanced settings
O
m → Picture → Advanced settings →
MEnU
EnTERE
(available in standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
✎
In PC mode, you can only make changes to
Contrast, gamma and White Balance.
Advanced Settings
Black Tone
Dynamic Contrast
Shadow Detail
Gamma
RGB Only Mode
Color Space
White Balance
Black Tone (Off / Dark / Darker / Darkest)
■
black level to adjust the screen depth.
Dynamic Contrast (Off / low / Medium / high)
■
Adjust the screen contrast.
shadow Detail : Increase the brightness of dark images.
■
✎
Disabled under PC mode.
gamma : Adjust the primary color intensity.
■
RgB Only Mode (Off / Red / green / Blue)
■
Red, Green and Blue color for making fine adjustments to
the hue and saturation.
Color space (Auto / native)
■
available to create the image.
White Balance : Adjust the color temperature for a more
■
natural picture.
R-Offset / g-Offset / B-Offset: Adjust each color's (red,
green, blue) darkness.
R-gain / g-gain / B-gain : Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Flesh Tone : Emphasize pink "flesh tone".
■
Edge Enhancement (Off / On)
■
boundaries.
BN68-02540C-Eng.indb 15
Dynamic
P
: Off ►
: Medium
: 0
: 0
: Off
: Native
▼
U Move E Enter R Return
: Select the
:
: Displays the
FAV.CH
: Adjust the range of colors
S.MODE
: Emphasize object
Picture Options
O
m → Picture → Picture Options →
MEnU
EnTERE
✎
In PC mode, you can only make changes to the
Tone, size and Auto Protection Time.
Picture Options
Color Tone
Size
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
POWER
Film Mode
Auto Protection Time
Color Tone (Cool / normal / Warm1 / Warm2)
■
✎
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
size : Your cable box/satellite receiver may
■
TOOLS have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate
magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time, traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
✎
nOTE
x
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the ► button to select Position.
2. Press the EnTERE button.
3. Press the ▲ or ▼ button to move the picture up
or down.
SLEEP
4. Press the EnTERE button.
5. Press the ► button to select Reset.
6. Press the EnTERE button to reset the picture
to its default position.
Color
: Normal ►
: 16:9
: Auto
: Auto
: Normal
: Off
CHLIST
INFO
: 2 hours
U Move E Enter R Return
P.MODE
P.SIZE
MTS
CC
MEDIA.P
15
English
2010-09-01 9:35:43