Samsung PN43D490A1D E-Manual page 164

❑ Switching between Anynet+ Devices
1. Press the
ENTER.
2. Select Device List, and then press the
If you cannot find a device you want, press the
N
3. Select a device, and then press the
selected device.
▶ The Device List
N
On in the
● Switching to the selected device may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
● If you have selected an Anynet+ device by pressing the
and then selecting its input source, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the
TOOLS button, select
menu appears only when you set
System menu.
Anynet+ (HDMI-CEC), and then press
ENTERE button.
a
ENTERE button. You can switch to the
English
button to refresh the list.
Anynet+ (HDMI-CEC)
SOURCE button
Device List.
to ▶