Samsung UN55C9000ZF Quick Setup Manual

Quick Setup Guide

Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
1-800-SAMSUNG (1-800-726-7864)
STOP
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park, NJ 07660-2112
Please do not return this unit.
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
If you have problems operating your
Call Center hours of operation: Mon-Sun, 9:00 AM -12
TV, call:
AM EST.
1-800-SAMSUNG (1-800-726-7864)
To register this product, visit: www.samsung.com/
For web support please visit:
register.
www.samsung.com/support
Step 1
: Install the Batteries into the Remote
Touch Control
1 2 3
Slide and open the Insert the battery Slide and close the
battery cover in with the Samsung battery cover in
the direction of the logo facing up. the direction of the
arrow. arrow.
Mini Remote Control
1
Turn the battery cover
counterclockwise to unlock it
and then separate the battery
cover.
2
Insert a 3V Lithium battery
with the + side facing down
into the battery cover.
3
Place the battery cover into
the remote control aligning it with the grooves and then turn the battery cover
clockwise to lock the cover.
✎
If the remote control doesn't work, check the following:
x Is the TV power on?
x Are the plus and minus ends of the batteries reversed?
x Are the batteries drained?
x
Is there a power outage or is the power cord unplugged?
x
Is there a special fluorescent light or neon sign nearby?
Step 2
: Connect Power and Antenna or Cable
VHF/UHF Antenna
Connect Ant In to
Antenna Cable
(Not Supplied)
• Wall cable jack
• VHF/UHF Antenna
• Cable or Satellite box
or Ant or Cable Out
Use a 75 ohm (round) cable.
Step 3
: Connect External Devices
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)
Use one of the connections below to connect
your TV to an external A/V device.
We recommend using HDMI for the highest
picture quality.
AV Adapter (Supplied)
Lowest Quality Connection
Audio/Video connection (480i only)
AV Adapter (Supplied)
Using an Audio/Video Cable
Audio Cable (Not Supplied)
AUDIO OUT
VIDEO OUT
Video Cable (Not Supplied)
OPEN
Step 4:
Run Plug & Play
CLOSE
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language, set
the clock mode, and launch the TV's channel memorizing process.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the ENTERE button.
To skip a screen, press the MENU button. To turn on your TV, press the
button on the remote or on the TV. To run Plug & Play, follow these steps:
1
Turn on the TV and Touch Control, and
then tap OK on your remote.
✎
It may take about one minute to establish
a wireless connection between the TV and
Touch Control using the Samsung Wireless
LAN Adapter.
2
Connect the Samsung Wireless LAN
Adapter to the TV. If you are failed, reconnect the Samsung Wireless LAN
Adapter and then try again. For connecting the Samsung Wireless LAN
Adapter, please see your Owner's Manual.
3
Using your remote control, select the language for the On Screen Display
(OSD), and then press ENTERE button.
4
Select Home Use, and then press the ENTERE button. If you select Store
Demo, the TV will reset your picture and audio settings every 30 minutes.
5
Select Antenna Source. If Antenna Source is Air, Cable or Auto, you must
select your cable system type. After selecting source, select Search; then
press the ENTERE button on your remote.
✎
Most cable systems are Standard(STD) systems, If you are not sure about
what kind of cable system you have, contact your cable company.
HDMI Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
Component Adapter (Supplied)
Component Cable (Not Supplied)
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Device
Audio Cable (Not Supplied)
✎
If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After
Plug & Play is complete, set your TV to Channel 3 or 4, according to the
directions for your cable or satellite box.
6
The TV memorizes the available channels. This process can take up to 45
minutes.
7
POWER
After the TV has memorized the channels, choose the Clock Mode. Select
Auto if you have a digital channel in your area. Select Manual if you don't, or
if you have a cable or satellite box. When done, press the ENTERE button.
✎
If you select Manual, the clock setting screen appears.
8
Select the daylight savings time setting: Off or On, and then press the
ENTERE button.
✎
This function is only available when the Clock Mode is set to Auto.
9
Select the time zone in which you live, and then press the ENTERE button.
10
After the time zone screen, The connection method for best HD screen
quality is displayed. Press Right arrow button on your remote to view each
screen in succession. Press the Blue button to skip this section.
11
The Enjoy your TV. screen appears. Then press the ENTERE button.
Changing the Screen Size
Your TV has several screen size options, each designed to work best with specific
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the
you press it, your TV displays the current setting. Thereafter, each time you press
the P.SIZE button, you change the size of the picture on the screen.
The following sizes are available:
Connecting an audio device (Home Theater, etc.)
Connect your TV to your Home Theater
or other audio device to enjoy enhanced
Sound quality.
Best Connection
HD connection (up to 1080p)
Using an HDMI Cable
HDMI OUT DVD, Blu-ray player, HD cable box,
HD STB (Set-Top-Box),
satellite receiver
Device
Very Good Connection
Audio Cable (Not Supplied)
HD connection (up to 1080p)
Using an HDMI to DVI Cable
DVI OUT
Connecting a PC
Device
AUDIO OUT
Connect your TV to a PC to use it as a Monitor.
Good Connection
Component connection (up to 1080p)
Using a Component Cable
COMPONENT OUT
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Device
AUDIO OUT
16:9 Wide screen
Zoom 1
✎
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Changing the Picture Mode
Your TV has four preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions.
The Picture Modes are listed and described in the table below:
Mode Description
Brightens picture. For a vibrant, enhanced image in brightly lit or
Dynamic
sunny room.
Standard For a bright, detailed picture in a normally lit room.
Natural For a comfortable, easy-on-the-eyes picture in a normally lit room.
Movie For a studio quality cinema picture in a dimly lit or dark room.
To change the Picture Mode, follow these steps:
1. Turn on your TV, press the
appears.
P.SIZE button on your remote. The first time
2. Using the ▲ or ▼ on your remote, select Picture Mode.
3. On the Picture Mode menu, use the ◄ or ► on your remote to select the
Picture Mode you want.
4. Press the EXIT
Digital Audio connection
Using an Optical Cable
Digital Audio System
OPTICAL
Optical Cable (Not Supplied)
Analog Audio connection
Using an Audio Cable
Amplifier / DVD home theater
AUDIO IN
HD connection
Audio Cable
Using an HDMI to DVI Cable
(Not Supplied)
AUDIO OUT
DVI OUT
HDMI to DVI Cable
(Not Supplied)
Using a D-Sub Cable
D-Sub Cable (Not Supplied)
PC OUT
Audio Cable (Not Supplied)
AUDIO OUT
4:3 Standard screen Wide Fit
Zoom 2 Screen Fit
TOOLS button on your remote. The Tools menu
button to exit the menu.