Burner Knob; Sensor Buttons - Miele HR1924 Operating Instructions Manual

Control panel

Burner knob

With the burner knob, you can ignite the burner and regulate the flame. The
burners can be variably adjusted between the lowest and highest settings.
The burner knobs are backlit with an illuminated ring.

Sensor buttons

The sensors react to touch. Each touch is confirmed with an audible tone. This
tone can be turned off (see "Settings – Volume - Keypad tone").
Sensor Function
button
Lift For raising and
panel lowering the
control panel for
the oven
Timer For activating and
deactivating timer /
alarm
Light For turning the
oven interior
lighting on and off
Back To go back a step
22
Notes
You can lift up and put down the control panel for
the oven automatically or manually (see "Settings –
Lift panel").
As soon as you start the self-cleaning cycle, the lift
panel goes down automatically.
If a list of options is shown in the display, or if a
cooking process is running, you can enter a timer
duration (e.g. when boiling eggs on the cooktop) or
an alarm time, i.e. a specific time, at any point (see
"Alarm + Timer").
If the time of day display is turned off, the "Timer"
sensor will not react until the oven is turned on.
If a menu appears in the display or if a cooking
process is running, touching "Light" will turn the
interior light on or off.
If the time of day display is turned off, the "Light"
sensor will not react until the oven is turned on.
The oven interior lighting turns off after 15 seconds
during a cooking process or remains constantly
turned on, depending on the setting selected.