Uniden UH5060VP Owner's Manual page 10

Mounting the MIC Hanger
Conventional Mounting with Double Sided Tape
(not supplied)
High quality Double-Sided tape can be found at good retail stores.
Secure the front and back pieces of the MIC Hanger using the supplied
binding screws.
Locate a suitable mounting position.
Apply high quality Double-Sided tape onto the flat area of the MIC
Hanger back piece and then press firmly to the mounting position.
MIC Hanger mounted over MIC Cable
The curly cord of the Remote SPK/MIC can extend up to
1.5m. For practical installation of the MIC Hanger mounted
NOTE
over MIC Cable use this method with the Extension Cable.
UNIDEN UH5060
10
UHF CB Transceiver