Connecting With The Pc - LG L1982UQ User Manual

Connecting the Display

Connecting with the PC

1.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect the signal cable
connection.
3.
Connect the power cable
then plug the cable in the outlet.
DVI-D D-SUB
1
4.
Press button on the front switch panel to turn
the power on. When monitor power is turned on, the
'Self Image Setting Function' is executed
automatically. (Only Analog Mode)
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the ' Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
. When attached, tighten the thumbscrews to secure the
1
with the AC-DC adapter (AC-DC power supply)
3
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view
as shown.
DC-IN
2
DVI-D Cable
(This feature is not available in all countries.)
Wall-outlet type
3
PC-outlet type
PC
PC
Mac adapter
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin high
density (3 row) D-sub VGA connector on the
MAC
supplied cable to a 15 pin 2 row connector.
A5
, and
2