Table of Contents
Advertisement
en
Operating the appliance
·
Hygiene *
The temperature is increased during the
cleaning process. This increases the
hygiene status. This additional option is
ideal for cleaning e.g. chopping boards
and baby bottles.
§
Half load *
H a l f l o a d
If you have only a few items to wash
(e.g. glasses, cups, plates), you can
switch to "half load". This will save
water, energy and time. It is
recommended to put a little less
detergent in the detergent dispenser
than for a full load.
¿
Extra drying *
An increased temperature during the
final rinse and an extended drying
phase ensure that even plastic parts dry
better. There is a slight increase in the
energy consumption.
22
H y g i e n e
E x t r a d r y i n g
Operating
the appliance
n g
O p e r a t i
Programme data
The programme data (consumption
values) can be found in the summary
of instructions. This data refers to
normal conditions and the water
hardness set value 2. Different
influencing factors such as water
temperature or mains pressure may
result in deviations.
A qua sensor *
A q u a s e n s o r
* depending on model
The Aqua sensor is an optical
measuring device (light barrier) which
measures the turbidity of the rinsing
water.
The Aqua sensor is used according to
the programme. If the Aqua sensor is
active, "clean" rinsing water can be
transferred to the next rinse bath and
water consumption can be reduced by
3–6 litres. If the turbidity is greater, the
water is drained and is replaced with
fresh water. In the automatic
programmes the temperature and
running time can also be adjusted to the
degree of soiling.
i a n c e
t h e a p p l
Advertisement
Table of Contents
