Tub Clean; Door Lock & Detecting - LG FH4U1JBSK Series Owner's Manual

How to use washer
■

Tub Clean (

Tub Clean is a special cycle to clean the inside of the washing machine.
A higher water level is used in this cycle at higher spin speed. Perform this cycle regularly.
NOTE
• Do not add any detergent to the detergent compartments.
• Excessive suds may generate and leak from the washer.
CAUTION
• If there is a child, be careful not to leave the door open for too long.
■
Door Lock & Detecting
26
)
1. Remove any clothing or items from the
2. Open the dispenser drawer and add Anti
3. Close the dispenser drawer slowly.
4. Power On and then touch and hold Tub
5. Touch the Start/Pause button to start.
6. After the cycle is complete, leave the door
•
•
washer and close the door.
limescale(e.g. Calgon) to the main wash
compartment.
Clean button for 3 seconds. Then '
and tub clean pictogram will be displayed
on the LED display.
open to allow the washer door opening,
flexible gasket and door glass to dry.
"Door Lock" - For safety reasons, the
door will lock while machine is in use and the
"Door Lock" icon will light up.
You can safely open the door after the "Door
Lock" icon turns off.
While "Detecting" is shown on the
display the washing machine rotates slowly
and detects how much laundry is loaded in
the drum.
It will take a short time.
'