Interior Lighting; Customer Menu; Error Notification - U-Line Modular 3000 Series User Manual & Service Manual

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

INTERIOR LIGHTING

Your U-Line 3000 Series unit uses a state of the art LED
lighting system.
Up
Down
1. To begin, press to enter the lighting menu.
2. Press or to cycle through each available
brightness setting (Low, Medium or High).
3. Press to cycle through each available timer setting.
Selections include "On With Door", "On 3 Hours", "On 6
Hours", or "On 24 Hours".
4. To exit, press or simply wait for the menu to time
out.

ERROR NOTIFICATION

The 3000 model series continuously monitors a series of
inputs and parameters to ensure proper and efficient
operation of your unit. Should the system detect a fault,
an error notification will be displayed on the user
interface. See below for a list of errors.
NOTE: Singe zone models will not use (L) left or (R) right
zone indicators in error notification.
ID Description
No Comm Unit lost
communication to the
display.
(L) (R) Zone T Left or right zone
Open thermistor circuit
open.
Amb Thrm Ambient thermistor
Open circuit open.
Select
Power
U-Select Lighting
Solution
Disconnect and
reconnect power to
unit. Contact
Customer Care if
persistent.
Contact Customer
Care.
Contact Customer
Care.
30
ID Description
(L) (R) Zone T Left or right zone
Short thermistor circuit
shorted.
Amb Thrm Ambient thermistor
Short circuit shorted.
(L) (R) Temp Hi Left or right zone
6H+ temperature +10°
over set point for
over 6 hours.
(L) (R) Temp Hi Left or right zone
12H+ temperature +10°
over set point for
over 12 hours.
(L) (R) Temp Lo Left or right zone
6H+ temperature -10°
under set point for
over 6 hours.
(L) (R) Temp Lo Left or right zone
12H+ temperature -10°
under set point for
over 12 hours.
(L) (R) Door Left or right door
Open 5M switch open for more
then 5 minutes.

CUSTOMER MENU

The 3000 Series of U-Line under counter refrigeration
appliances contains a feature rich customer menu. The
Customer Menu allows access to a series of advanced
features including Energy Saver Mode, Sabbath Mode,
actual temperature readings as well a method to restore
factory defaults.
3000 SERIES - CUSTOMER MENU
Up
Down
1. To access the Customer Menu hold
2. Press or to scroll through available selections.
3. Press to enter selected sub-menu.
u-line.com
Solution
Contact Customer
Care.
Contact Customer
Care.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
Select
WELCOME TO THE
CUSTOMER MENU. USE
UP/DOWN ARROWS TO
SCROLL SETTINGS.
for 5 seconds.
Control Operation 3