1
1. Torque wrench
11. Install the engine oil drain bolt and its new
gasket, and then tighten the bolt to the
specified torque.
8
Tightening torque:
Engine oil drain bolt:
22 N·m (2.2 kgf·m, 16 lb·ft)
12. Refill with the specified amount of recom-
mended engine oil into the oil filler hole.
13. Install the dipstick with the arrow pointing
in the direction shown.
1
1. Engine oil dipstick
2. Arrow mark
TIP
Be sure to wipe off spilled oil on any parts af-
ter the engine and exhaust system have
cooled down.
14. Start the engine, and then let it idle for
several minutes while checking it for oil
leakage. If oil is leaking, immediately turn
the engine off and check for the cause.
8-19
2