LG WTR206HM Owner's Manual page 28

T RO U B L E S H O OT I N G
BEFORE CALLING FOR SERVICE
Problem
The display shows:
The display shows:
The display shows:
The display shows:
Staining
Wrinkling
The display shows:
28
Possible Causes
• If the uE rebalance (see
above) is not successful, this
error will be displayed.
• The load is too small.
• Heavy articles are mixed with
lighter items.
• The load is out of balance.
• Thermistor error
• The water level sensor is not
working correctly.
• Thermal overload protection
circuit in the motor has been
tripped.
• Add laundry products to the
washer drum.
• Washer not unloaded
promptly.
• Does not properly sort the
clothes.
• Washer not unloaded
promptly.
• Washer overloaded.
• Hot and cold water inlet
hoses are reversed.
Foreign objects, such as coins,
pins, clips, etc., caught
between the wash plate and
the inner basket.
(cont.)
Solutions
• The automatic attempt to rebalance the load was not
successful. The cycle has been paused to allow the
load to be manually adjusted.
• Small loads may need additional items to be added
to allow the washer to balance the loads.
• The load may have heavy items loaded with lighter
items. Always try to wash articles of somewhat
similar weight to allow the washer to evenly distribute
the weight of the load for spinning.
• Manually redistribute the load if articles have become
tangled preventing the automatic distribution from
working properly.
• Unplug the washer and call for service.
• Close the water taps, unplug the washer, and call
for service.
• Allow the washer to stand for 30 minutes to allow the
motor to cool; then restart the cycle. If the LE error
code still appears, unplug the washer and call
for service.
• Load the laundry products into the dispenser.
• Always remove items from the washer as soon as
the cycle is completed.
• Always wash dark colors separately from light colors
and whites to prevent discoloration. If possible, do
not wash heavily soiled items with lightly soiled
ones.
• Always remove items from the washer as soon as
the cycle is completed.
• The washer can be fully loaded, but the drum should
not be tightly packed with items. The lid of the
washer should close easily.
• Hot water rinse can set wrinkles in garments. Check
the inlet hose connections.
Turn off the washer and then press the Power button.
Press the spin speed button without selecting a cycle
to drain and spin the load. When the spin is complete,
remove the clothes and then find and remove any
objects caught in the wash plate. Always check
pockets, etc., before washing to prevent error codes
or damage to the washer or clothing.