Table of Contents
Advertisement
8. SETTING THE WATER SOFTENER
(MODEL DEPENDING)
WATER HARDNESS & REGENERATION SETTINGS
The dishwasher requires lime free water. Hard water leaves watermarks on your dishes.
Your dishwasher has a special water softening system to remove the hardness of the tap
water. Setting this system correctly will increase the washing effectiveness.
To find out the hardness level of water in your area, contact your local Water Board or
Determine water hardness level by the help of test strip provided.
If you move to a different location, the level of water hardness will possibly
be different. It is essential to reset the water hardness in order to obtain
optimum washing efficiency.
Test Strip
a
b
Remove the
Let the water
test strip from
flow from your
its packing.
tap for 1 minute.
To Adjust the Water Hardness
1. After turning on the machine, press Time Delay and P+/P keys simultaneously. After the
countdown (3,2,1) is displayed keep the keys pressed for a while.
2. Press P+/P key to activate the position.
3. Using Time Delay key, adjust water hardness level according to the hardness of the
supply water. See "Water hardness level adjustment table" for correct setting.
4. Press On / Off key to save the setting.
Water Hardness Level Adjustment Table
English
German
Hardness
Water
Water
Level
Hardness
Hardness
°dE
1
Level
st
0-5
0-4
2
Level
nd
6-9
3
Level
rd
10-15
8-12
4
Level
th
16-19
13-15
5
Level
th
20-24
16-19
6
Level
th
25-62
20-50
c
d
1 second
Take the test strip
Fill a glass with
out of the water and
tap water and
dip the test strip
shake it.
into water for 1
second.
French
Water
Water Hardness Level Indicator
Hardness
°dH
°dF*
0-8
Press the Time Delay key to switch the water hardness level to position 1. (r 1)
5-7
9-13
14-22
Press the Time Delay key to switch the water hardness level to position 2. (r 2)
23-27
Press the Time Delay key to switch the water hardness level to position 3. (r 3)
28-34
Press the Time Delay key to switch the water hardness level to position 4. (r 4)
35-90
Press the Time Delay key to switch the water hardness level to position 5. (r 5)
e
f
Level 1
Level 2
Level 3
Level 4
1 minute
Level 5
Level 6
Hold for
Set the water hardness level of your dishwasher
1 minute.
according to the result shown by the test strip.
28
USA
No Lime
Very low lime content
Low lime content
Medium lime content
High lime content
Very High lime content
Advertisement
Table of Contents
