Getting Started
✎
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing
downwards.
1
Insert the Stand Connector into the
Stand in the direction shown by the
figure.
4
Place a soft cloth over the table to
protect the product and place the
product onto the cloth so that the front
of the product is facing downwards.
- Caution
If the height of "
" on one side is
A
B
different from the other side, unfasten
the screws, adjust the heights, and
re-assemble.
✎
The cleaning cloth is supplied with black high-glossy models only.
✎
The colour and the appearance may differ depending on the product, and the specifications are subject to change
without prior notice to improve the performance.
Installing the Stand
2
Check if the Stand Connector is firmly
connected.
5
Push the assembled stand into the
main body in the direction of the arrow
as shown in the figure.
Avoid lifting the product holding only
the stand.
3
Turn the connecting screw at the
bottom of the stand fully so that it is
completely fixed.
6
Firmly fasten the stand using the
screws.
12
English