Operation; Introduction; Test Run; Daily Operation - California Air Tools 200CR-22060 Owner's Manual

OPERATIONS
Save this manual for future reference.

Introduction

This air compressor features a compact structure, stable
performance, a high airflow rate, easy operation and
maintenance. Because the motor/pump produces no oil in the
airflow, it can be used as an independent air supply machine for
situations in which oil in the airflow is an issue. The motor directly
drives the pistons and is able to function without lubrication for a
long period of time.

Test Run

Using Motor/Pump as an Air Compressor with Air Tank.
1. Turn the power switch to the OFF position.
Plug the power supply cord into a power supply socket.
Start the air compressor by turning the power switch to the ON
position.
The pressure gauge reading will slowly rise as pressure
increases inside the air tank.
When the gauge reading reaches the pressure switch will
automatically turn the power off. This indicates the compressor
is working normally.
Turn the power switch to the Off position, unplug the power
2.
supply cord and release the air in the tank by pulling on the
safety valve. At this point proceed to the next step (daily
operations).
Note: If the Air Compressor is not working properly, the
pressure gauge will indicate that there is a decrease in
pressure in the air tank. If there is an air leak from the
compressor the pressure in the air tank decreases, the
pressure switch resets and the motor automatically turns
back on.
10
Flying objects can cause injury to the eyes, head and
other parts of the body.
Air-powered equipment and power tools are capable
of propelling items (metal chips, fasteners and
particulates) at high speed into the air and could
result in injury.
Always wear approved head and eye protection.
Never point the air stream at any part of your body,
or at another person or animal.
When operating the air compressor, make sure all
other people and animals maintain a safe distance.
Do not move the air compressor when the air tank is
under pressure.
Never use the air hoses to pull or move the air
compressor.
Keep the air compressor on a flat surface.

Daily Operation

Starting as an air compressor:
1. Turn the power switch to the OFF position.
2. Attach air hose
3. Check that all air fitting are tight and closed.
4. Maintain 2 feet of open space around the air compressor
5. Plug the power supply.
6. Turn the power switch to the ON position.
7. Do not use continously (running) for more than 8 hours of
Shutting down the compressor:
1. Turn the power switch to the OFF position.
2. Unplug the power supply cord.
Customer Support: 1-866-409-4581
WARNING
FLYING OBJECTS
continuous running at 90 PSI and 12 hours at 40 PSI