Page 1
Need help fast? Read your User’s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/support 01-43_DVP3026_94_eng_RC2 30/06/06, 4:53 PM...
Page 2
CD-Audio copy protection or countries. enhanced CD-Audio protection recently available on certain discs, Philips is unable to guarantee that this DVD Player is fully compatible with such new discs. Should you have difficulty playing any such CD-Audio discs, kindly refer them to your CD- Audio disc retailer.
Page 3
"DTS" and "DTS Digital common and will be easy to complete. Macrovision Corporation. Reverse Surround" are registered trademarks Go to www.philips.com/support for engineering or disassembly is prohibited. software upgrade. of Digital Theater Systems, Inc . All Right Reserved.
Page 4
Specifications are subject to change without notice. Trademarks are the property of The apparatus shall not be exposed to dripping Koninklijke Philips Electronics N.V. or their or splashing and no objects filled with liquids, respective owners. such as vases, shall be placed on apparatus.
Contents Language Disc Operations ..............Playable Discs ..........19 Region Codes ..........19 Introduction Playing discs ............. 20 Supplied accessories ........8 Basic playback controls ......... 20 Cleaning discs ........... 8 Selecting various repeat/shuffle functions 21 Setup ..............8 Repeat play mode ......... 21 Repeating a section within a chapter/track .
Page 7
Contents DVD Setup Menu Options General Setup menu ....... 27-28 Locking/Unlocking the disc for viewing ... Dimming player’s display panel ....27-28 Programming disc tracks ....... OSD Language ..........Sleep ..............Volume ............Audio Setup Menu ........29-31 Analogue output ........... 29-30 Digital Audio Setup ........
Introduction Supplied accessories Setup Finding a suitable location – Place the set on a flat, hard and stable Composite video surface. Do not place the set on a carpet. cable (yellow) – Do not position the set on top of other equipment that might heat it up (e.g., receiver or amplifier).
Connections Connecting TV COMPONENT COMPONENT VIDEO IN VIDEO IN S-VIDEO S-VIDEO V (Pr/Cr) AUDIO V (Pr/Cr) AUDIO U (Pb/Cb) U (Pb/Cb) VIDEO IN VIDEO IN COMPONENT S-VIDEO VIDEO IN V (Pr/Cr) AUDIO COMPONENT VIDEO IN S-VIDEO U (Pb/Cb) V (Pr/Cr) VIDEO IN AUDIO U (Pb/Cb)
TV. See your When no disc is loaded, press electronics retailer or contact STANDBY ON on the DVD Player Philips for details on RF modulator availability and operations. front panel, “NO DISC” may appear on the display panel.
Connections Optional: Connecting to a Multi- Optional: Connecting to a Stereo channel Receiver System STEREO AUDIO DIGITAL MULTICHANNEL AUDIO IN AV Receiver FRONT REAR CENTER FRONT REAR SUBW. Receiver has a Dolby Digital or DTS Stereo system has Dolby Pro Logic decoder or Right / Left Audio In jack Select one of the video connections...
Connections Optional: Connecting Digital AV Receiver AV Receiver AUDIO DIGITAL Receiver has a PCM, Dolby Digital, or MPEG2 decoder Select one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your TV. Connect the COAXIAL jack of the DVD player to the corresponding Digital Audio In jack on your Receiver (cable not...
Functional Overview Front and Rear Panels STANDBY-ON B – Turns the player on or switches it to standby mode 9 STOP Disc tray – Stops playback 2; PLAY/PAUSE OPEN/CLOSE / – Starts or pauses playback – Opens or closes the disc tray IR Sensor Display –...
Functional Overview Remote Control DISC MENU – Turns the player on or switches – Enters or exits the disc contents it to standby mode menu – Switches on or off the playback DISPLAY control mode (for VCD version 2.0 only) –...
Getting Started Step 2: Setting up the TV Step 1: Inserting batteries into the Remote Control IMPORTANT! Make sure you have completed all the necessary connections. (See pages 9-10 “Connecting TV”). Turn on the TV and set to the correct video-in channel.
Getting Started Setting up Progressive Scan feature ACTIVATING PROGRESSIVE SCAN: (for Progressive Scan TV only) 1. ENSURE YOUR TV HAS PROGRESSIVE SCAN. 2. CONNECT USING YPBPR (GBR) VIDEO CABLE. 3. IF THERE IS A DISTORTED PICTURE, WAIT The progressive scan display twice as 15 SECONDS FOR AUTO RECOVERY.
Getting Started Select an item and press OK. Selecting the colour system that ➜ Follow the instructions shown on the corresponds to your TV TV to confirm the selection (if any). This DVD player is compatible with both Helpful Hints: NTSC and PAL.
Getting Started Step 3: Setting language Setting the Audio, Subtitle and Disc menu language preference You can choose your own preferred The language options are different language or soundtrack from audio, depending on your country or region. It subtitles and disc menu languages. If the may not correspond to the illustrations language selected is not available on the shown on the user manual.
Disc Operations IMPORTANT! Region Codes – If the inhibit icon (ø) appears on This DVD player is designed to support the TV screen when a button is the Region Management System. Check pressed, it means the function is not the regional code number on the disc available on the current disc or at package.
Disc Operations Playing discs Basic playback controls Unless otherwise stated, all operations Connect the power cords of the DVD described are based on Remote Control player and TV (and any optional stereo or use. AV receiver) to a power outlet. Turn on the TV power and set to the Pausing playback correct Video In channel.
Disc Operations For JPEG, DivX Selecting various repeat/shuffle functions In STOP mode, – Repeat One (currently playing file) – Repeat Folder Repeat play mode (all files in selected folder) – Folder (playing all files in one folder once) The repeat play options vary depending –...
Disc Operations Operations for video playback Resuming playback from the last stopped point (DVD/VCD/SVCD) Resume playback of the last 5 discs is Using the Disc Menu possible, even if the disc was ejected, the Depending on the disc, a menu may power switched off or the power being appear on the TV screen once you load in cut-off.
Disc Operations OSD (On-Screen Display) (DVD/ Time Search VCD/SVCD) Press 3 4 to highlight {Time Disp.} (Time Display), then press 2 to access. Using the OSD menu ➜ The following display types appears on OSD menu shows the disc playback the TV, depending on the Disc in the information (for example, title or chapter player.
Disc Operations Audio/Subtitle Preview Function The preview function allows you to Press 3 4 to highlight {Audio} or reduce the picture of 6 tracks enough to {Subtitle}, then press 2 to access. ➜ display in a full screen. Audio or Subtitle menu appears on the Press 3 4 to highlight {Preview} , then press 2 to access.
Disc Operations Special DVD Features Special VCD & SVCD Features Playing a Title Playback Control (PBC) Press DISC MENU. For VCD with Playback Control (PBC) ➜ The disc menu appears on the TV feature (version 2.0 only) screen. Press DISC MENU to toggle between Use 3 4 1 2 keys or alphanumeric ‘PBC ON’...
Disc Operations Zoom picture (JPEG) Playing MP3/WMA/JPEG/Kodak Picture CD During playback, press ZOOM repeatedly to display the picture with different scales. IMPORTANT! to view the zoomed picture. 3 4 1 2 You have to turn on your TV and set to the correct Video In channel.
DVD Setup Menu Options This DVD player setup is carried out via Dimming player’s display panel the TV, enabling you to customise the You can select different levels of DVD player to suit your particular brightness for the display screen. requirements.
DVD Setup Menu Options If you want to remove a track Sleep Use 1 2 3 4 keys to move the cursor to Sleep function allows you to turn off the the track you want to remove. DVD Player automatically after a preset Press OK to remove this track from the time.
DVD Setup Menu Options Audio Setup Menu Digital Audio Setup The options included in Digital Audio In disc mode, press SETUP. Setup are: ‘Digital Output’ and ‘LPCM Press 1 2 to select ‘Audio Setup’ icon. Output’. Press OK to confirm. In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {DIGITAL AUDIO SETUP}, then - - Audio Setup Page - -...
DVD Setup Menu Options LPCM Output Sound Mode If you connect the DVD Player to a PCM The options included in Sound Mode compatible receiver via the digital Setup are: ‘3D’, ‘Movie Mode’ and ‘Music terminals, such as coaxial or optical etc, Mode’.
DVD Setup Menu Options Video Setup Menu Night Mode - turning on/off In this mode, the high volume outputs are In disc mode, press SETUP. softened. It is useful for watching your Press 1 2 to select ‘Video Setup’ icon. favourite action movie without disturbing others at night.
DVD Setup Menu Options Progressive - turning on/off Setting the TV Display Set the aspect ratio of the DVD Player In the progressive scan mode, you can according to the TV you have connected. enjoy the high quality picture with less The format you select must be available flickers.
DVD Setup Menu Options Press 3 4 to highlight one of the Picture Setting following options. This DVD Player provides three BRIGHTNESS predefined sets of picture colour settings Increase the value to brighten the picture and one personal setting which you can or vice versa.
DVD Setup Menu Options Preference Page Restricting playback by Parental Control Press Ç twice to stop playback (if any), Some DVDs may have a parental level then press SETUP. assigned to the complete disc or to Press 1 2 to select the ‘Preference Page’ certain scenes on the disc.
DVD Setup Menu Options Restricting playback by Parental Control You can set the PBC to ON or OFF. This Press 3 4 to highlight a rating level for feature is available only on Video CD 2.0 with playback control (PBC) feature. For the disc inserted and press OK.
DVD Setup Menu Options Changing the Password Restoring to original settings The same password is used for both Setting the DEFAULT function will reset Parental Control and Disc Lock. Enter all options and your personal settings to your six-digit password when prompted the factory defaults, except your on the screen.
Sound and Volume Controls {SUBWOOFER} Setting the speakers’ channels ON – when a subwoofer is connected. You can adjust the delay times (centre OFF – when no subwoofer is connected. and surround only) and volume level for {SPEAKER VOLUME} – Volume level individual speakers.
– Check if your receiver can decode MPEG-2 and if not, please make sure the digital output is set to PCM. – Check if the audio format of the selected audio language matches your receiver capabilities. Visit us at www.philips.com/support for service support 01-43_DVP3026_94_eng_RC2 30/06/06, 4:55 PM...
Page 39
– Depending on the disc availability, some menu items cannot be selected. Unable to select Progressive Scan on/off – Check that the output of the video signal is switch to ‘YUV’. Visit us at www.philips.com/support for service support 01-43_DVP3026_94_eng_RC2 30/06/06, 4:55 PM...
Glossary Analog: Sound that has not been turned into Multichannel: DVD is specified to have each sound numbers. Analog sound varies, while digital sound has track constitute one sound field. Multichannel refers specific numerical values. These jacks send audio to a structure of sound tracks having three or more through two channels, the left and right.
Page 43
Meet Philips at the Internet http://www.philips.com/support DVP 3026 CLASS 1 LASER PRODUCT sgpSL-0626/94-2_RC2 01-43_DVP3026_94_eng_RC2 30/06/06, 4:55 PM...