Controlling Tvs With The Remote - Sony DVP-SR550P Operating Instructions Manual

Controlling TVs with the remote

You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
Available buttons
Depending on the connected unit, you may
not be able to control your TV using all or
some of the buttons on the supplied remote.
Buttons Operations
TV [/1 Turn the TV on or off
2 (volume) +/–
Adjust the volume of the
TV
TV t
Switch the TV's input
(input select) source between the TV and
other input sources
To control other TVs with the remote
You can control the volume, input source, and
power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer's code.
1
While holding down TV [/1, press the
number buttons to select your TV's
manufacturer's code.
2
Release TV [/1.
b
When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Manufacturer Code number
Sony 01 (default)
Hitachi 24
JVC 33
LG/Goldstar 76
Panasonic 17, 49
Philips 06, 08, 72
Samsung 71
Sharp 29
Toshiba 38
13