Problem
I want to start Anynet+.
I want to exit Anynet+.
◀
●
Check if the Anynet+ device is properly connected to
the TV and check if
On
in the
System
●
Press the TOOLS button to display the Anynet+ menu
and select a menu you want.
●
Select
View❑TV
●
Press the SOURCE button on the TV remote control
and select a device other than Anynet+ devices.
●
Press >❑CH❑< button to change the TV mode. (Note
that the channel button operates only when a tuner-
embedded Anynet+ device is not connected.)
English
Possible❑Solution
the❑Anynet+❑(HDMI-CEC)
menu.
in the Anynet+ menu.
is set to
▶