Samsung SyncMaster 320TSn-3 User Manual page 55

"ReCalibrate", "OK" and "Cancel" buttons will appear after the calibration. Select "ReCali-
brate" to calibrate again, "OK" to save and exit, or "Cancel" to exit without saving.
Settings
The Settings window is split into 8 areas (FIG. 7):
1. Modes
2. Enable Touch
3. Hide Cursor
4. Enable Double Click
5. Enable Right Click
6. Enable Drag Delay
7. Enable Delay Touch
8. Enable Beep
Modes
There are three touch modes : "Click on touch," "Click on Release," "Mouse Emulation."
1. Click on touch
A click is recognized when your finger contacts the touchscreen. Note that you cannot drag
objects. The touchscreen responds fastest in this mode, which is recommended for big-button
applications.
2. Click on Release
This is the default mode. A click is recognized when you lift your finger off the screen. This
mode allows precise control and is recommended for small-button applications or hyperlinks
to web pages such as POS or other web applications.
3. Mouse Emulation
Using the Software
FIG. (7)