Radio Operation; Stereo Reception; Auto Search - Telefunken TF-CSRP3502B Instruction Manual

Cd radio player with bluetooth
Table of Contents

Advertisement

Available languages

Available languages

Instruction manual
CD/MP3 operation
Press the FUNCTION button to select the
CD mode.
Open the CD compartment at the top.
Insert a CD/MP3 disc, close the CD door, wait
a few seconds, the player will play the first
track and the LCD will display the total
number of tracks.
Press PLAY/PAUSE button to pause
playback. Press the button again to
resume playback.
• Press repeatedly SKIP+/SKIP-
buttons to go to a next or a previous track.
Press and hold these buttons for backward
or forward searching; release the button for
normal playback.
During the playback press MODE.
With each press the unit will repeat: one
track, folder (for MP3 discs), all tracks or
random track,
To program playback, stop it first,
then press MODE. Use SKIP+/SKIP-
buttons to select your desired track and
press MODE again to confirm. Repeat this
for other tracks. Press PLAY to play the
tracks in the programmed order. Press
STOP twice to cancel the programmed
playback.

Radio operation

• Press the FUNCTION button to select
the Radio mode.
• Press the SKIP+ or SKIP- buttons
to adjust the radio frequency to your desired
position.
• Press and hold the SKIP+ or SKIP-
buttons to automatically search the next or
previous radio station with a strong signal.
Antenna
• This appliance has a FM antenna
located at the back. Fully extend the antenna
for a better signal reception.
5

Stereo reception

• If a radio signal is weak and there are
abnormal noises, we recommend to receive
the FM signal in mono mode. Press the ST
button to switch between mono and stereo. ST
is shown on display when stereo is selected.
Storing and recalling radio stations
• If you want to store a radio station
in memory, first select the station you want to
store, next press the MODE button. "P01" will
start blinking, meaning that the station will be
stored as Preset 1.
• Press the SKIP- or SKIP+
button to select a different memory preset.
Press the MODE button again to confirm.
Up to 30 stations can be preset.
• To recall a saved preset station
press the M+/ M-/ STOP button to select your
preset station, the display will show "PXX",
press the M+/ M-/ STOP button again to go to
a next preset radio station, press and hold the
M+/ M-/ STOP button over 2 seconds to go to
a previous preset radio station.

Auto search

• Press and hold the SEARCH button
to automatically search and store all available
radio stations (up to 30).
• Press the M+ button
to select a preset radio station.

Advertisement

Table of Contents
loading

Table of Contents