Setup; Initial Settings - Samsung BD-D7500 User Manual

Setup

Initial Settings

1. Turn on your TV after connecting the player.
When you connect the player to a TV for the
first time, player turns on automatically and
the Initial Settings screen appears.
Initial Settings | On-Screen Language
Select a language for the on-screen displays.
Български
Dansk
Eesti keel
Deutsch
Indonesia
2. Press the ▲▼◄► buttons to select the
desired language, and then press the ENTER
button.
3. Press the ENTER button to select Start.
4. Press the ▲▼ buttons to select the desired
TV Aspect Ratio, and then press the ENTER
button. (See page 33)
5. Press the ▲▼ buttons to select the desired
Network Settings : Wired, Wireless (General),
WPS(PBC) or One Foot Connection, and
then press the ENTER button. If you do not
know the details of your Network Settings,
press the BLUE (D) button on your remote
instead to skip Network Settings here, finish
the Initial Settings, and go to the Home menu.
If you selected a Network Setting, go to
pages 39~43 for more information about the
Network settings. When done, go to Step 6.
6. The Home menu appears. (For more
information about the Home menu, please
see page 31.)
30
English
Hrvatski Čeština
Nederlands English
Suomi Français
Ελληνικά Magyar
Italiano
한국어
m Move " Enter
• Home Menu
My Contents
My Devices
NOTE
✎
` When the player is connected to the TV for the first
time, the player turns on automatically. This is not a
malfunction.
` The Home menu will not appear if you do not
configure the initial settings except as noted below.
` If you press the BLUE (D) button during the network
setup, you can access the Home menu even if the
network setup is not completed yet.
` If you want to display the Initial Setting screen again
to make changes, select the Reset option. (See page
44)
` If you use an HDMI cable to connect the player to an
Anynet+(HDMI-CEC)-compliant Samsung TV and
1.) You have set the Anynet+(HDMI-CEC) feature
to On in both the TV and the player and 2.) You have
set the TV to a language supported by the player,
the player will select that language as the preferred
language automatically.
` If you leave the player in the stop mode for more
than 5 minutes without using it, a screen saver will
appear on your TV. If the player is left in the screen
saver mode for more than 20 minutes, the power
will automatically turn off.
Videos
Photos
Music
Internet Settings
d WPS(PBC)