Table of Contents
Advertisement
5
Press ENTER to accept them.
To enter other pro-
grams, repeat steps
2 through 5.
• To return to the
normal screen,
press VCR MENU
twice.
6
Press TIMER REC. The clock symbol (
appear on the display and the DVD/VCR stands by
for recording. At the same time, VCR mode will
change to DVD mode automatically. You can use
DVD even if the VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
• If the clock symbol (
spite of the pressing of TIMER REC, the cassette
may not have been loaded yet. (see page 23)
• If the cassette is ejected in spite of the pressing
of TIMER REC, the erase prevention tab of the
cassette may have been removed. (see page 23)
Notes:
• In case of the timer recording from the scart socket,
proceed as follows: In step 4, press
until the "CH" line blinks. Then press
edly until "AV1" or "AV2" or "AV3" appears.
• If the clock symbol (
ended, the TV program has not been completely
recorded because of an insufficient tape supply. Press
TIMER REC to cancel the timer program or press
EJECT on the DVD/VCR to remove the cassette tape.
• During timer recording standby mode, the VCR mode
cannot be selected. To use the VCR, press TIMER
REC at first, then press VCR to change to VCR mode.
Press TIMER REC again to set the VCR into timer
recording standby mode.
Timer Recording Special Case
Weekly (e.g. WKL-TUE: each Tuesday) or daily (e.g.
MON-SAT: Monday to Saturday) Timer recording
Follow the procedure for timer recording on page 28. At
picture 3, press
or
setting appears. Then press
repeatedly, the indicator at DATE will change as
follows, in case today is Friday.
SUN-SAT
25 FRI ..... 24 SUN
MON-SAT
MON-FRI
MON-SAT = everyday from
Monday to Saturday
WKL-SAT = each Saturday
2J50301A [EN] P29-37
23 MON
13:00 14:30
1
------ --:-- --:-- --
------ --:-- --:-- --
------
--:--
--
--:--
------
--:--
--:--
--
------
--:--
--:--
--
------
--:--
--:--
--
------
--:--
--:--
--
SELECT :
/ ENTER
EXIT : MENU
) will
) blinks on the display in
or
repeatedly
or
repeat-
) blinks when the timer recording
repeatedly until the desired
. When you press
One month later
minus one day
WKL-FRI
WKL-THU.....WKL-SAT
TIMER REC SET
DATE
WKL-WED
START
11:30
--:--
END
CH
2
SPEED
SP
VPS/PDC
ON
SELECT :
SET
:
/0Ð9
EXIT
: MENU
33
In case of Timer programs-overlapping
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
LP
-
time has priority over the next recording time as
-
-
shown in the diagram below.
-
-
-
-
8 : 00
Program 1
Program 2
Program 3
Recording
Control Settings
Notes:
• The daily/weekly recording can be made continuously
until the recording is cancelled or the tape reaches the
end.
• During timer recording the automatic rewinding mecha-
nism does not function.
Confirmation / Cancellation of the Timer
Recording
1
If the Timer has been activated, press TIMER REC
to deactivate the Timer. The clock symbol (
disappear. Then press VCR to change to VCR
mode.
2
Press PROGRAM. All the 8 Timer memories will
appear.
3
To cancel Timer program: Press
the written line. Then press CANCEL. This line is
now cancelled.
or
4
Press VCR MENU (or PROGRAM) repeatedly until
the TV-picture appears.
3/22/06, 8:11 PM
Timer recording
9 : 00
10 : 00
Deleted Parts
Non Recorded Portion Parts
Prog.1
Prog.2
Prog.3
17:30
18:00
7
15 TUE
23 MON 13:00
14:30
1
25 WED 12:15
13:00
4
------
--:--
--
--:--
------
--:--
--
--:--
------
--:--
--
--:--
------
--:--
--:--
--
------
--:--
--
--:--
SELECT :
/ ENTER
CLEAR : CANCEL EXIT : MENU
or
to select
------
--:--
--:--
-- -
23 MON 13:00
14:30
1
25 WED 12:15
13:00
4
------
--:--
--:--
--
------
--:--
--:--
--
------
--:--
--:--
--
------
--:--
--:--
--
------
--:--
--:--
--
SELECT :
/ ENTER
EXIT : MENU
11 : 00
) will
SP
LP
SP
-
-
-
-
-
LP
SP
-
-
-
-
-
33
Advertisement
Table of Contents
