Table of Contents
Advertisement
How to use
After 10 seconds, the HBM-585 will automatically enter pairing mode.
•
When the headset enters pairing mode, the LED indicator will show
•
a solid white light.
Using your handset, find the Bluetooth menu and "search for" or
•
"add" new devices.
Select "LG HBM-585" from the list of devices and pair it with your
•
handset.
If you are asked for the passkey or PIN during pairing, please enter
•
"0000" (4 zeros).
Once pairing has been completed successfully, you will hear "Headset
•
paired".
After pairing has been completed, make sure you "connect" to the
•
LG HBM-585. You will hear "Connected".
If you want to pair with a different device in the future, the headset
•
must be in pairing mode.
If the headset is in pairing mode for 3 minutes without being
•
connected to a handset, the HBM-585 will automatically turn off.
2) Manual Pairing
With the power off, press and hold the MFB for 6 seconds.
•
When the headset enters pairing mode, the LED indicator will show
•
a solid white light.
Using your handset, find the Bluetooth menu and "search for" or
•
"add" new devices.
Select "LG HBM-585" from the list of devices and pair it with your
•
handset.
If you are asked for the passkey or PIN during pairing, please enter
•
"0000" (4 zeros).
Once pairing has been completed successfully, you will hear "Headset
•
paired".
After pairing has been completed, make sure you "connect" to the
•
LG HBM-585. You will hear "Connected"
If you want to pair with a different device in the future, the headset
•
must be in pairing mode.
If the headset is in pairing mode for 3 minutes without being
•
connected to a handset, the HBM-585 will automatically turn off.
6
Auto reconnect
- If the HBM-585 is turned off (either accidentally or intentionally) while
connected to a handset, the headset and handset will disconnect.
The headset and handset will automatically reconnect when the
HBM-585 is turned back on (provided that both devices are within
the required range of 33 feet 10 metres).
[ Out of range ]
- When your handset and HBM-585 are separated by a range of 33
feet (10 metres) or more, the headset and handset will disconnect.
When the handset and HBM-585 are within the required range again,
the HBM-585 will automatically reconnect to the handset.
- If the headset and handset do not automatically reconnect when
they are back within the required range, briefly press the MFB on
the HBM-585 to reconnect manually.
Volume control
- Press the VOLUME button to adjust the speaker volume.
- There are eight levels of speaker volume. The volume will increase
one level, each time the volume button is pressed. When the headset
reaches the maximum volume level, the next press of the button returns
the headset to the lowest volume level.
Calling
Answering a call
- When there is an incoming call, the headset will ring.
- Briefly press the MFB to answer the incoming call.
Making a call
- If you make a call from the handset, the call will (depending on the
phone settings) automatically transfer to the headset. If the call is
not automatically transferred, you can manually transfer the call by
briefly pressing the MFB on the HBM-585 (handset and headset
must be paired).
How to use
7
Advertisement
Table of Contents
