Table of Contents
Advertisement
2 Relock shelf by pushing the slide
mechanism away from you.
3 While holding shelf at a 45-degree
angle with the gray handle facing
you, push the shelf into the back of
the hanger.
CAUTION
Shelves must be removed prior to
moving the refrigerator.
4 Gently set the shelf onto the hanger
once the back is secured by the hanger.
5 Remove shelf from its locked position
by pulling the slide mechanism
toward you.
Installation
6 Lift the hanger directly upwards and pull
toward you to remove it from the ladder.
Reposition the Air Seal
(select models)
1 Remove air seal by pushing seal
straight back.
2 Position the air seal towards the
outside edge of the shelf to avoid the
air tower when shelf is pushed back
into place.
3 Install seal by sliding the open
channel end of the seal onto back
edge of shelf until seal sits snug on
back of shelf and flap sits at about a
10 degree angle from shelf surface.
Air Seal
Air Seal
9
Advertisement
Table of Contents
