Table of Contents
Advertisement
How to connect the cables and stand base
Colors may vary depending on the model you purchase
Remove the cover as shown in
1
the picture.
Replace the cover.
3
.
Connect the cables as shown in
2
the picture.
Attach the stand to the
4
TV set as shown in the picture.
Note : The curved side of the stand base should be
placed at the back of the TV set as shown in
the above figure.
Do NOT lift the TV set by the stand.
The stand is not screwed to the TV set and
lifting the set by the stand may cause injury.
English-59
Advertisement
Table of Contents
