Auto Setup
Automatically retunes the channels received in the area.
This function is available if channel tuning is already performed.
●
Only the selected mode is retuned. All the previous tuning settings are
●
erased.
Child Lock PIN number is required to retune locked channels.
●
Functions > Child Lock > PIN number
If tuning has not been done completely, set
●
Watching > Tuning and editing channels > Manual Tuning
■
DVB-C, DVB-T, Analogue
1. Select
Auto Setup
2. Set
DVB-C Auto Setup Settings
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency in your country.
Normally set Frequency,
●
is not displayed or if necessary, enter each value specified by your
cable provider with
After settings, select
●
3. A confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
and press
OK
to access.
and press
Symbol Rate
Numeric
buttons.
Start scan
and press
- 89 -
Manual
Tuning.
OK
to store. (DVB-C)
and
Network ID
to Auto. If
OK
to search.
OK
to start
Auto
Auto
Setup.