Table of Contents
Advertisement
Menu functions
Your phone is suited for connecting to the network
by default. If you change the settings without first
checking with your service provider, the web
browser, MMS, and e-mail features may not work
properly.
Creating a profile
1. Press <New>. If a profile has already been saved,
press <Options> and select Add new
connection.
2. Specify each information:
•
Profile name: enter a profile name.
•
Homepage URL: enter the URL address of the
page to be used as your homepage.
•
Proxy: activate or deactivate the proxy server.
•
IP address: enter the IP address of the proxy
server.
•
Port: enter the port number of the proxy
server.
•
Linger time: set a time period after which the
network is disconnected if there has been no
new data traffic in that time.
86
•
DNS: activate or deactivate the DNS (Domain
Name Server) addresses.
•
DNS1 and DNS2: enter the primary and
secondary DNS addresses.
•
Bearer: select the network bearer type.
•
Advanced settings: change the advanced
options. Depending on the bearer setting,
available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Dial number: enter the PPP phone number.
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
3. Press <Save> to save the profile.
Advertisement
Table of Contents
