Table of Contents
Advertisement
Section 3 - Web-based Configuration
IPv6 Device Management Interface - You can select an Autoconfiguration (dynamic), Static IP, or Link-local IPv6 configuration:
My IPv6
Select Autoconfiguration (SLAAC/DHCPv6) to have the
Connection is:
DAP-1120 automatically receive an IPv6 address from the
uplink router.
Obtain DNS
You can select to obtain IPv6 DNS server information
Server Address:
automatically, or you can select to configure DNS servers
manually.
Primary DNS
Enter the primary IPv6 DNS server address.
Server:
Secondary DNS
Enter the secondary IPv6 DNS server address. This is optional
Server:
but will provide backup if the primary server fails.
My IPv6
Select Static IPv6 to manually assign an IP address to the
Connection is:
DAP-1120.
IPv6 Address:
Enter the IPv6 address that you want to assign to the
extended network AP. This address should be outside of the
uplink router's DHCP address pool.
Subnet Prefix
Enter the length of the IPv6 subnet prefix.
Length:
Default Gateway:
Enter the default gateway.
Primary DNS
Enter the primary IPv6 DNS server address.
Server:
Secondary DNS
Enter the secondary IPv6 DNS server address. This is optional
Server:
but will provide backup if the primary server fails.
D-Link DAP-1120 User Manual
25
Advertisement
Table of Contents
