Table of Contents
Advertisement
›
Connect to a WLAN using a Wi-Fi Protected
Setup (WPS)
1
In Menu mode, select
2
WPS button depending on the AP device type.
Select
3
Press a WPS button on the AP device within 2 minutes.
Or, enter a PIN on the AP device and select Start within 2
minutes.
›
Connect to a WLAN device directly
Learn to use the WLAN Direct feature to connect two devices
via a WLAN without requiring an access point.
Connect your device to another WLAN device
1
In Menu mode, select
2
Continue (if necessary).
Select
3
Drag the slider next to
The device will automatically search for available devices.
4
Select a device.
When the owner of the other device accepts the
connection, pairing is complete.
5
To deactivate the Wi-Fi Direct feature, drag the slider next
to Activation.
Send data via a WLAN
1
Select a file or item, such as a memo, media file, or web
address, from an appropriate application or My files.
2
Select an option for sending data via a WLAN.
The method for selecting an option may vary by data
type.
3
Search for and select a WLAN device.
Settings
→
Wi-Fi.
Settings
→
Wi-Fi
Activation.
Connectivity
92
→
Wi-Fi Direct.
Advertisement
Table of Contents
