Table of Contents
Advertisement
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a standard 3- pronged 230~240 V AC 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the plate tray.
The plate tray must always be in place during cooking.
3. Close the door and Make sure that it is firmly closed.
1
The oven light is on when the microwave oven
is operating or the door is opened.
2
The oven door can be opened at any time
during operation by opening the door. The oven
will automatically shut off.
3
Each time a pad is touched, a BEEP will sound
to acknowledge the touch.
4
The oven automatically cooks on full power
level.
5
The display will show ":0" when the oven is
plugged in.
6
When the STOP/CLEAR pad is touched during
the oven operation, the oven stops cooking and
all information retained.
To erase all information, touch the
STOP/CLEAR pad once more. If the oven door
is opened during the oven operation, all
information is retained.
7
If the START pad is touched and the oven does
not operate, check the area between the door
and door seal for obstructions and make sure
the door is closed securely.
The oven will not start cooking until the door is
completely closed or the program has been
reset.
Make sure the oven is properly installed and
plugged into the electrical outlet.
8
Advertisement
Table of Contents
