Belkin F8Z896 User Manual

LiveAction Camera Remote [show]
Two AAA (LR03) batteries [show]
Install the batteries:
The Remote takes two AAA (LR03) batteries.
1. Slide the battery cover to remove it from the remote. [illustration 1, show
arrow sliding battery cover off]
2. Insert the batteries, paying attention to the + and – markings inside the
battery compartment.
3. Slide the battery cover back on.
Pair the remote with your iPhone:
1. Turn on the remote using the switch on the side. [illustration 2]
2. Visit the Settings app on your iPhone. [show Settings app icon] Choose
General, then Bluetooth. Make sure Bluetooth is On.
3. Press and hold the Pair button on the remote until the green light blinks
rapidly, then release it. This should take three seconds or so.
4. LiveAction Remote will appear in the list of Bluetooth devices. Touch the
LiveAction Remote list item.
5. If your iPhone asks for a PIN, enter 0000. Your remote is now paired with
your iPhone.
Get the LiveAction app:
1. The Remote works with the Belkin LiveAction camera app. Visit the App
Store and search for LiveAction. [show LiveAction icon – get it from Lucky
Diaz if you need it]
2. When you find the app, install it. (It's free.)
Take pictures and video:
1. Open the Belkin LiveAction app.
2. Use the black button on the remote to take still pictures. Use the red button
on the remote to start and stop taking video. [illustration 3 indicating
buttons]
3. Still pictures (frames of video) can be taken while recording video; just press
the black button.
Prop your iPhone with the included stand:
1. Remove the stand from the body of the remote by grasping the stand and
pulling it from the remote body. [illustration 4 with arrow pulling stand from
remote body]
2. Rotate the leg of the stand to the desired angle.
3. Fit the jaws of the stand over your iPhone. The jaws will spread to grip
LiveAction Camera Remote
User Manual