System Admin - D-Link DIR-878 User Manual

Section 4 - Configuration
This page will allow you to change the administrator (Admin) password and
enable remote management. In the Management menu on the bar on the top
of the page, click System Admin. To load, save, reset settings, or reboot the
router, click System and refer to Schedule on page 72.
Admin Password
Password: Enter a new password for the administrator account. You will need to
enter this password whenever you configure the router using a web
browser.
Advanced Settings - Administration
Enable Remote
Remote management allows the DIR-878 to be configured from the
Management: Internet by a web browser. A password is still required to access the web
management interface.
Remote Admin
The port number used to access the DIR-878 is used in the URL. Example:
https://x.x.x.x:8081 where x.x.x.x is the Internet IP address of the DIR-878
Port:
and 8081 is the port used for the web management interface.
LED Control: Turn on or off to configure the LED status lights.
Click Save when you are done.
D-Link DIR-878 User Manual

System Admin

75