Table of Contents
Advertisement
Plug your oven into a standard household
socket. Make sure your oven is the only
appliance connected to the socket. If your oven
does not operate properly, unplug it from the
electrical socket and then plug it back in.
Fill a microwave safe container with
300 ml (1/2 pint) of water. Place on
the GLASS TRAY and close the oven door. If you
have any doubts about what type of container to
use please refer to page 37.
Open your oven door by pulling the DOOR HANDLE. Place
the ROTATING RING inside the oven and place the GLASS
TRAY on top.
Press the
Stop/Clear
button, and
press the
Start/Q-start
button one
time to set 30
seconds of cooking time.
5
The DISPLAY will count down from 30
seconds. When it reaches 0 it will sound
BEEPS. Open the oven door and test the temperature of
the water. If your oven is operating the water should be
warm. Be careful when removing the container it may
be hot.
YOUR OVEN IS NOW INSTALLED
Advertisement
Table of Contents
