Table of Contents
Advertisement
Location of controls
Description of Indicators and Controls
1. Remote sensor
2.
(Standby/On) indicator: The LED indicator lights up red in standby mode, and blue in the power
ON mode.
3. Loudspeakers
4.
(Power)-button: Preparation: Connect power-cable to AC220~240V/50Hz. (LT-32HG22J: turn on
mains switch (9).)
a) If standby-LED is red, you may power-off. To power-off, press power-button 1x and release.
For confirmation, standby-LED will change to dark. Power-on by remote control is not available.
b) If standby-LED is off, you may power-on. To power-on, press power-button 1x and release.
For confirmation, standby-LED will change to blue.
5. TV/AV/PC/ENTER button: Select input mode for TV/AV/COMPONENT/HDMI/PC. In Menu : Using as
ENTER button.
6. MENU button: To display the menu screen.
7.
/ /▲/▼ buttons: Press
change to a lower numbered channel set into memory. In Menu: Setting.
8.
+/–/◀/▶ buttons / In Menu: Setting.
9. Mains switch (LT-32HG22J) toggle switch on underside. Switch on/off power supply completely.
For complete disconnection from the mains power supply, remove the supplied power cable from the
socket.
3
9 (LT-32HG22J)
to change to a higher numbered channel set into memory. Press
2
1
8
7
6
5
4
to
7
Advertisement
Table of Contents
