Table of Contents
Advertisement
4
4
Displaying RDS information
DISP
Use the
button to display the different types of RDS
information available.
...
DISP
Press
for RDS information.
Each press changes the display as follows:
Listening mode
•
•
Master volume
•
Radio Text (RT) – Messages sent by the radio station.
For example, a talk radio station may provide a phone
number as RT.
•
Program Service Name (PS) – The name of the radio
station.
•
Program Type (PTY) – This indicates the kind of
program currently being broadcast.
•
Current tuner frequency (FREQ)
Note
If any noise is picked up while displaying the RT scroll,
•
some characters may be displayed incorrectly.
•
If you see NO TEXT in the RT display, it means no RT data
is sent from the broadcast station. The display will
automatically switch to the PS data display (if no PS data,
NO NAME is displayed).
In the PTY display, NO PTY may be shown.
•
•
Special characters not supported by the unit may appear
as spaces.
Listening to DAB Digital Radio
1
TUN
BAND
Press
then press
to select DAB.
•
The very first time you select DAB, the Auto Tuning
function automatically scans the DAB Band 3 for the
multiplexes (i.e., stations) available in your area.
•
Once the scanning process is complete, the first
station that was detected is selected.
•
If a new DAB station is introduced, or you move to a
HOME MENU
new area, press
button on the remote
controller, then in the Home Menu displayed set "DAB
Setup"– "DAB SCAN". See
DAB Scan on page
2
Select the desired radio station with
Changing the order stations are displayed
You can sort the available stations alphabetically or by
multiplex.
...
PTY
Press
repeatedly to set the method for sorting the
display order from the following.
•
Alphabet (default setting): Sort stations
alphabetically.
•
Multiplex : Sort stations by multiplex.
Displaying DAB Radio Information
...
DISP
Press
repeatedly to display more information
about the selected DAB station.
•
DLS (Dynamic Label Segment): When tuned to a
station that's broadcasting DLS text data, the text will
scroll across the display.
Program Type: Displays the type of program.
•
Bit Rate and Audio Mode: Displays the station's bit
rate and audio mode (Stereo, Mono).
•
Quality: Displays the signal quality.
0 - 59: Poor reception
60 - 79: Good reception
80 - 100: Excellent reception
•
Multiplex Name: Displays the name of the current
multiplex.
•
Multiplex Number and Frequency: Displays the
number and frequency of the current multiplex.
24
34.
TUNE
+/–.
Basic playback
2
4
35
Advertisement
Table of Contents
