Receiving Traffic Information Automatically - Yamaha YHT-5950U Owner's Manual

Receiving traffic information automatically

(U.K., Europe, Russia and Middle East models only)
When "TUNER" is selected as the input source, the unit automatically receives traffic
information. To enable this function, perform the following procedure to set the traffic
information station.
1
When "TUNER" is selected as the input source, press OPTION.
2
Use the cursor keys to select "Traffic Program" and press ENTER.
The traffic information station search will start in 5 seconds. Press ENTER
again to start the search immediately.
NOTE
▪ To search upward/downward from the current frequency, press the cursor keys while "READY"
is displayed.
▪ To cancel the search, press RETURN.
The following screen appears for about 3 seconds when the search
finishes.
LINK MASTER
OUT 2
Hi -R es ENHANCER
ECO
TP FM101.30MHz
Traffic information station (frequency)
NOTE
"TP Not Found" appears for about 3 seconds when no traffic information stations are found.
STEREO TUNED ZONE
2 A 3 B
SLEEP PARTY
YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
55
En