Adjustment Before Operation - Yamaha RX-V990 Owner's Manual

Natural sound stereo receiver

Hide thumbs Also See for RX-V990:

Service manual (85 pages)

Table Of Contents

Table of Contents

SPEAKER BALANCE ADJUSTMENT

This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using

the built-in test tone generator. With this adjustment, the sound output level heard at the listening position will be

the same from each speaker. This is important for the best performance of the digital sound field processor.

The adjustment of each speaker output level should be done at your listening position with the remote control

transmitter. Otherwise, the result may not be satisfactory.

* If you have a video monitor connected to this unit, you should use it to display the on screen information. The

easy-to-read information will help you to perform this adjustment.

Note:

Before adjustment, make sure that the mute circuit is not engaged. While mute is engaged, no sound will be heard and an

indicator on the master VOLUME control flashes. See page 23 for details.

Set to the " " position.

Set to the "0" position.

BASS

Set to the "0" position.