Midi Channel Setting; Setting The Midi Program Change Table - Yamaha ProR3 Owner's Manual

34
Advanced uses (3) – Utility functions –

MIDI channel setting

Here's how to set the MIDI transmit and receive channel.
1. Press the UTILITY key to access the MIDI channel setting page.
2. Press the INC or DEC key to set the channel.
OMNI: All channels 1–16 will be received, and the transmit channel will be 1.
1–16: Transmission and reception will take place on the specified channel.
OFF: MIDI data will be neither transmitted nor received.

Setting the MIDI program change table

You can make settings for each of the four MIDI program change table banks of the ProR3. With
the factory preset settings, MIDI program numbers 1–90 correspond to USER program numbers
1–90, and MIDI program numbers 91–128 correspond to PRESET program numbers 1–38.
1. Repeatedly press the UTILITY key until the MIDI program change table page appears.
2. Use the CURSOR keys (√) (®) to select a parameter.
3. Press the INC or DEC key to set the parameter. You can also use the numeric keys to
directly enter a MIDI program number.
BANK
PGM
ProR
ProR3 Digital Reverberator
MIDI Channel
MIDI PGM Change Table
BANK:A PGM
A–D Specify the program change bank
1–128 The MIDI program number
U01–U90, P01–P90 This is the ProR3 program number which will be recalled when the MIDI pro-
gram number is received. U01–U90 and P01–P90 respectively indicate
USER and PRESET program numbers.
--- With a setting of ..., nothing will be recalled. *
* --- also can be input by CANCEL key.
OMNI
1= ProR U01